| COMPONENT |
INDICATION |
DIRECTION |
Canister (MR-61048)
Canister and Vacuum Protection Filter (MR3000C)
Canister Vacuum Protection filter and
Solidifier (MR3000CS) |
Fluid collection. 800cc canister with a
bacterial float activates the closed system alarm at 750cc.
The smaller PRO-II™
canister is a 250 cc self enclosed unit with filter and attached tubing.
Solidifiers
help gel the fluid. Filters protect possible con-tamination of the unit. |
Secure the lid tightly to the canister.
Place in the plastic holder attached to the unit.
The filter section should be securely
attached to the underside of the canister lid. The solidifier packet should be placed
in the bottom of the canis-ter. |
| Vacuum Protection Hydrophobic Filter with tubing
(MR3000) |
Silicone connection tubing between the unit and the canister lid. Filter
protect possible contamination of the unit. |
Attach the tubing securely to the unit at the blue spout. Attach the other
end to the canister lid. The blue side of the filter should face the blue spout. The white
side of the filter should face the white canister lid. |
| Vacuum Protection Filter (MR3052) |
One directional anti-bacterial filter. |
If the filter becomes wet or cracked it should be replace. |
| Y-Connector with Tubing (MR3001) |
Increases the ability to control fluid from multiple wounds. |
Attach the Y-connector at the white canister lid. Attach the clear PVC
tubing (blue male end) to each adapter end. |
| Solidifier (MR4000) |
Use to 'gel' the fluids. |
Place the solidifier in the base of the canister. |
Universal Holder
(MR50-11510)
(coming soon) |
May be used to attach the unit to the bed or IV pole. |
Slide the larger center metal into the center back receptor area of
the unit. Attach the arms to the bed or chair. Attach the screw adapter to the IV pole. |
Battery Pack
(MR50-12103) |
Allows the unit to be used without AC power. PRO-I™ last
approximately 24 hours and PRO-II™ 20 hours. |
|
AC Power Cord Adaptor/Charger
(MR50-51305) |
Allows charging of the unit. |
Plug the round end of the cord into the bottom side port of the unit. Place
the metal prongs into an appropriate wall unit or equivalent. |
Car Adaptor/Charger
(MR50-11303 |
Allows charging of the unit from a 12V battery. |
Plug the round end of the cord into the bottom side port
of the unit. Place the charger into the appropriate 12 V receptacle. |
Carrying Bag
(MR50-99420)
Disposable |
Increases the transportability of the units. For single patient use. |
Insert the unit inside the carrying bag. Reattach tubing through the
appropriate openings if necessary. Adjust the carrying strap for comfort. |
| Plastic Holder for Canister
(MR50-11312) |
Attaches to the unit to secure the canister. |
Slide the plastic holder downward along the side or
rear of the unit until secured. |
